Preparing your property before a Full Risk Reduction (Dust Wipe) Lead Inspection can help reduce the likelihood of failed samples, additional cleaning, and repeat inspections.
1. Check all painted surfaces
Before your inspection, ensure all interior and exterior painted surfaces are intact, with no chipping, peeling, cracking, flaking, or other paint damage.
Pay particular attention to windows, doors, trim, exterior woodwork, and cornices.
Complete necessary repairs before scheduling your inspection.
2. Thoroughly clean floors
Lead dust can remain on floors even when they appear clean. Before your inspection:
- Thoroughly clean floors using a suitable cleaning solution.
- Work systematically across the floor to avoid spreading dust from one area to another.
- Use a HEPA vacuum to help capture fine dust.
- Pay extra attention to corners, edges, and areas near windows.
3. Clean wooden window wells and troughs
Window wells and troughs - the areas where the bottom window sash rests when closed - can be particularly difficult to pass.
- Thoroughly clean these areas, removing accumulated dirt and dust.
- Use a suitable cleaning solution and clean cloths to avoid spreading contamination.
- If possible, clean window troughs on the morning of your inspection.
- After cleaning, keep windows closed and avoid disturbing these areas until the inspection.
4. Address problems before the inspection
If paint is damaged or surfaces are difficult to clean, address these issues before your appointment.
Repeated cleaning may not resolve every problem, particularly on older wooden window troughs or unfinished concrete floors.
Important: passing cannot be guaranteed
Maryland's Full Risk Reduction requirements include a visual inspection and dust wipe sampling. All applicable painted surfaces must meet the required condition standards, and dust samples must meet Maryland's lead dust clearance limits.
Thorough preparation helps, but passing cannot be guaranteed.
Questions before your appointment?
If you have questions about preparing your property, please contact Shell Home Inspections before your scheduled appointment.
